DIRECTIONAL DRILLS
FROM USA

Search for equipment below:

Select Equipment Type:

Select Manufacturer:


DIRECTIONAL DRILLS

Ditch Witch JT2020 Mach1

The 83-hp (62 kW) JT2020 packs 20,000 pounds of pulling power and the highest ratio of power to size in its class. This well-balanced, powerful drill is engineered with a one-step anchoring system for quick setup and a groundbreaking pipeloader that allows column selection from the operator's station.

Specifications JT2020 MACH 1

DIMENSIONS U.S. METRIC
Overall length* 203 in 5.16 m
Overall width* 51.5 in 1.31 m
Overall height* 78 in 1.98 m
Drilling unit operating mass* 10,800 lb 4899 kg
Entry angle 10° to 14°
Angle of approach 18°
Angle of departure 18°
POWER PIPE U.S. METRIC
Length, nominal* 120 in 3 m
Diameter 2.06 in 52.3 mm
Diameter, tool joint end* 2.63 in 66.8 mm
Minimum bend radius 130 ft 39.6 m
Weight (lined)* 67 lb 30.4 kg
OPERATION U.S. METRIC
Maximum spindle speed* 150 rpm
Maximum spindle torque* 2200 ft·lb 2983 N·m
Carriage thrust travel speed* 140 fpm 43 m/min
Carriage pullback travel speed* 140 fpm 43 m/min
Thrust force* 17,000 lb 75.6 kN
Pullback force* 20,000 lb 89 kN
Bore diameter 4 in 102 mm
Backream diameter (soil dependent) Variable
Ground travel speed, maximum*
    Forward 3 mph 4.8 km/h
    Reverse 3 mph 4.8 km/h
POWER U.S. METRIC
Engine Cummins B3.3
Fuel Diesel
Cooling medium Liquid
Injection Direct
Aspiration Turbocharged
Number of cylinders 4
Displacement 199 in3 3.3 L
Bore 3.74 in 95 mm
Stroke 4.53 in 115 mm
Manufacturer's gross power rating** 83 hp 62 kW
Rated speed 2400 rpm
Emissions Compliance EPA Tier 2 EU Stage II
DRILLING FLUID SYSTEM (ON-BOARD) U.S. METRIC
Drilling fluid pressure, maximum* 1500 psi 103 bar
Drilling fluid flow, maximum* 30 gpm 114 L/min
FLUID CAPACITIES U.S. METRIC
Hydraulic reservoir 17 gal 64 L
Fuel tank 30 gal 114 L
BATTERY U.S. METRIC
SAE Reserve capacity rating 195 min
SAE Cold crank rating @ 0° F (-18° C) 950 A